Welcome Neelkanth Rubber Mills

Home

Neelkanth V - Belts are Manufactured under strict vigilance and observation of the state of art of modern technology with reinforcement of highly shock - load resistant synthetic cords combined with special rubber compound and ultimately jacketed to obtain maximum life and smooth run of the drive.

(A) Top Compression Section - The rubber used in this section is compounded to withstand sudden shock loads and to keep the belt flexing readily When passing over the pulleys.

(B) Insulation Section - The insulation section holds the tension binding section for extra strong abhesion between cords and the top and bottom compression section.

(C) Bottom Compression Selection - This section holds the normal cross section of the belts and is compounded to resist compression fatigue and heat for longer service life.

(D) Tension Member - The load carrying cords are tough polyester/ aramide cords that have been specially treated to temper the cords to their point of high strength, Low elongation and greater resistance to bending fatigue.

(E) Cover - The bias-cut Cover fabric is impregnated with special rubber to protect the inner part of the belts and provide strong abrasion resistance on the pulley groove.

Technical Characteristics - Sectional Dimensions & Sizes (All Sizes in MM)

Section	Top (TW) Width	Thickness mm	Angle	Range of Pitch Length mm LW/L	Diff. in Length			Absolute Min. Pulley
Section	Top (TW) Width	Thickness mm	Angle	Range of Pitch Length mm LW/L	L1-LP (+)	LP-LA (+)	L1-LA (+)	Dia	Depth	Groove Angle
SPZ SPA SPB SPC A	9.5 12.5 16.0 22.0 13.0	8.0 10.0 13.0 18.0 8.0	40 40 40 40 40	380-3550 750-4500 1250-8000 2000-9500 380-8500	37 45 60 83 36	13 18 28 30 14	50 63 88 113 50	63 90 140 224 75	11.0 12.8 17.5 23.8 11.0	38+0.5 38+0.5 38+0.5 38+0.5 38+0.5
B C D E O/Z/M SP20	17.0 22.0 32.0 38.0 10.0 20.0	11.0 14.0 19.0 23.0 6.0 2.5	40 40 40 40 40 40	480-1400 625-1400 1120-15190 3550-17750 350-3800 1600-5000	43 56 79 92 22 60	26 32 40 53 16 28	69 88 119 145 38 88	125 200 355 450 60 150	14.0 18.5 25.0 30.0 8.5 16.0	38+0.5 38+0.5 38+0.5 38+0.5 38+0.5 38+0.5
SP25 3V 5V 8V	25.0 9.7 16.0 25.4	16.0 8.0 13.5 23.0	40 40 40 40	1600-12000 380-3500 1960-12000 1750-12500	65 37 60 92	35 13 25 53	100 50 85 145	225 63 140 250	20.0 10.0 17.5 28.0	38+0.5 38+0.5 38+0.5 38+0.5

Process Control in Manufacturing - Confirms the product as Antistatic, Oil & Heat Resistant, quality & length as accurate.

Neelkanth Q-Set V-Belts - Neelkanth Q-Set V-Belts envisage most modern Techno-effect geometrically, accurate length length without and grading, facilitating easy stoking, mounting and smooth longest drive life.

Section	Force (N)	Deflection 0.0115 per MM of Span
SPZ	67 to 95 100 to 140	1.0 to 1.5 1.5 to 2.5
SPA	100 to 132 140 to 200	1.5 to 2.5 1.5 to 2.5
SPB	160 to 224 236 to 315	1.5 to 2.5 1.5 to 2.5
SPC	224 to 355 375 to 560	1.5 to 2.5 1.5 to 2.5
A B C D E	80 to 140 125 to 200 200 to 400 355 to 600 600 to 900	1.5 to 2.5 1.5 to 2.5 1.5 to 2.5 1.5 to 2.5 1.5 to 2.5

«« Back